What's Your Data?
This will be a place to discuss the results you and others are getting on the H-Cat.
Sterling Allan Thu 3 Apr 2014 12:33AM
Frank Crowther whipped together some aluminum fins for finding the sweet spot on our H-Cat http://peswiki.com/index.php/Free_Energy_Blog:2014:04:02#Crowther.27s_H-Cat_aluminum_fins.3B_H-Cat_email_forum_created
Poll Created Thu 3 Apr 2014 12:40AM
Sweet: Graph L/m versus heat profile on aluminum fin set-up Closed Fri 4 Apr 2014 12:08AM
I think all we need to do is go from low to high on the liters/minute, starting at ~0.5 and going up in increments of 0.5 L/m; then hook the hose up to the catalyzer and let it run for about 15 minutes, taking temperature measurements as often as possible, from several places on the catalyzer. We can then run the numbers to see 1) the relationship between L/m and heat; 2) the heat increase curve on the catalyzer. This is not intended to be an input/output calorimetry test, but rather an attempt to find a sweet spot, if there is one.
Results
Results | Option | % of points | Voters | |
---|---|---|---|---|
|
Agree | 100.0% | 1 | |
Abstain | 0.0% | 0 | ||
Disagree | 0.0% | 0 | ||
Block | 0.0% | 0 | ||
Undecided | 0% | 1 |
1 of 2 people have participated (50%)
Sterling Allan
Thu 3 Apr 2014 12:41AM
I posted the proposal, so of course, I agree =_)
Sterling Allan · Thu 3 Apr 2014 12:32AM
I finished my first calorimetry test results write-up last night: http://pesn.com/2014/03/31/9602464_Sterlings-first_H-Cat_calorimetric-test/